Celaunds.com

Tech which makes Sense

Introduction

Perverts are out there to catch you with their antisocial activities. You really are living in a strange and disgusting world where people make money any way they can. It is better to be aware of possible signs that inform you about the intentions of the people around you. Therefore, you should keep an eye on your surroundings before entering a room. If it is not possible for you to go and investigate, you can ask your achievement to do the same for you. In this article, we will list some tips to help you protect yourself before you enter the fitting room of a store in a marketplace.

  1. As soon as you enter the test room, look for any items that have an unusual hole in the wall surfaces. It could hold a small camera away from the surface.

  2. Look carefully for the popular items that are present in the wardrobe. These could be alarm clocks, stereos, desk lamps, speakers, radios, wall outlets, air purifiers, shelves, stuffed animals, and bookcases.

  3. You can do a simple static interference test to check if the tiny cameras are present there or not. You can do this by simply sweeping the room.

  4. If you have network connectivity in the locker room, you can even make phone calls to verify your presence.

  5. If phone calls don’t go through, one can be sure that an electronic device is nearby. Due to electronic interference from other devices in the neighborhood, phone calls cannot go through normally.

  6. Try to find any suspiciously placed tinted glass or dome in the room and move closer. If possible, try to disassemble it yourself or seek help from the authorities present in the store.

  7. Also look for the hidden cameras in the ceiling. In all likelihood, the cameras would be stealthily installed on the roof to get a better view.

  8. Always be attentive to the mirrors that are in the changing rooms and bathrooms. Some perverts may install two-way mirrors so they can see what’s going on on the other side. Place your fingertip on the mirror and see if there is a gap between your finger and your image. If the gap is there, then the mirror is genuine, not the two-way type.

Leave a Reply

Your email address will not be published. Required fields are marked *